
Superior Casket Lowering Device in Chrome or Stainless Steel
800 lb capacity. Positive-lock braking. Lifetime lubrication.
Casket lowering devices and stands for cemeteries and funeral homes. Chrome or stainless steel, 800 lb. capacity, positive-lock braking. Made in Louisville, KY.
3 products
800 lb capacity. Positive-lock braking. Lifetime lubrication.

All LD3287 features plus placer arms. Check bars for hilly terrain.

Adjustable steel stand fits any Junkin lowering device. 70 lbs.
A casket lowering device (also called a cemetery lowering device or grave lowering device) is the frame that sits over an open grave and lowers the casket into it on straps at a slow, controlled speed. It lets one operator carry out the committal smoothly and quietly, with no one handling the casket by hand at the graveside. Junkin Safety manufactures the Superior Lowering Device in Louisville, Kentucky, and every model on this page is built here.
The device is set over the grave, usually on a stand, and adjusted to the size of the opening. Web straps run across the frame between its two side rails, and the casket rests on those straps during the service. When the brake is released the straps pay out evenly and the casket descends under its own weight, while the brake and speed control hold the rate steady all the way down.
On the Superior Lowering Device, that control comes from a positive-lock braking system with all-brass gearing, and speed control is complete on every model. The mechanism is lubricated for life, so it needs no routine maintenance.
The LD3287 adjusts from 26 to 40 inches wide and from 67-1/2 to 95-1/2 inches long to fit the grave opening. It is rated for an 800-pound load and uses 21-foot straps that are each individually tested to 400 pounds.
Two finishes are available. The LD3287-C is finished in heavy-duty chrome plate with polished aluminum. The LD3287-SS is built in stainless steel for the greatest resistance to corrosion.
The LD3287-CR and LD3287-SSR add placer arms, with check bars at either end of the device that hold the casket motionless even on hilly terrain. These models are rated to 650 pounds with the placer arm units in place and come in the same chrome and stainless steel finishes.
The LD-Stand is an adjustable base built from powder-coated rectangular steel tubing. It adjusts in length, width and height to suit the grave and gives the lowering device a stable footing on uneven ground. It weighs 70 pounds and fits any Junkin lowering device.
Lowering devices ship from our Louisville factory by freight, UPS or FedEx. Full specifications are in our funeral and mortuary catalog. For pricing, replacement straps or parts, or help choosing a model, call 502-775-8303 or send us a message.
| Model | Load Capacity | Closed Dimensions | Open Dimensions | Finish |
|---|---|---|---|---|
| LD3287-C / LD3287-SS Superior Casket Lowering Device in Chrome or Stainless Steel | 800 lbs. | 67-1/2" Long × 26" Wide | Adjusts to 40" Wide × 95-1/2" Long | Chrome plate / polished aluminum / stainless steel |
| LD3287-CR / LD3287-SSR Superior Casket Lowering Device with Placer Arms | 650 lbs. (placer arm units) | — | — | Chrome plate / polished aluminum / stainless steel |
| LD-Stand Adjustable Lowering Device Stand | — | — | — | Powder coated |
How a cemetery lowering device works, the parts that matter, and what to check before you buy one.
A casket lowering device is a frame placed over an open grave that lowers the casket on straps at a controlled speed. It is also called a cemetery lowering device, grave lowering device or burial lowering device.
The casket rests on web straps stretched across the frame. Releasing the brake lets the straps unwind evenly, so the casket descends under its own weight while the brake and speed control keep the descent slow and steady. Junkin's Superior Lowering Device uses a positive-lock braking system with all-brass gearing.
The Junkin LD3287 Superior Lowering Device is rated for 800 pounds. The LD3287-CR and LD3287-SSR, which add placer arms, are rated for 650 pounds. Each 21-foot strap is individually tested to 400 pounds.
The LD3287 adjusts from 26 to 40 inches wide and from 67-1/2 to 95-1/2 inches long, so one device can be set to the grave opening in front of it.
Both finishes use the same mechanism and carry the same load rating. Chrome plate with polished aluminum (LD3287-C) is the traditional finish. Stainless steel (LD3287-SS) is the choice where the greatest corrosion resistance is wanted.
Placer arms hold the casket in position on the device before it is lowered. On the LD3287-CR and LD3287-SSR, check bars at either end keep the casket motionless even on hilly terrain.
The Superior Lowering Device is lubricated for life and needs no routine maintenance. Keep it clean and dry between services and check the straps before each use.
Pricing is available on request. Call 502-775-8303 or request a quote for current pricing, straps and parts.
Call us or send a message and we’ll get back to you promptly. Distributor accounts welcome.